Welding Industries Australia

1300 300 884

wle

COMPACT MIG WITH INTEGRATED WIREFEEDER. IDEAL FOR WORKSHOPS.

  • Single Phase Input Power

Compact MIG Package

Compact MIG with feature packed integrated wirefeeder, enabling custom set-up to suit the job - including arc start, low wire speed, burnback, spot time, trigger latch, inch, purge and pre and post gas.

Ideal for the Workshop Environment

Economical option for workshops where a separate wirefeeder isn’t required. Works well under a bench.

Portable

Easy to move around the workshop, with no messy leads between the power source and wirefeeder.

Easy to Access Controls

All controls are located on the front panel – easy access to all wirefeeder features.

Welds up to 12mm

Fillet weld up to 12mm of mild steel, stainless steel or aluminium.

Reduced Power Consumption

The Fan-on-Demand™ cooling system uses less power and generates less noise by only operating when needed, meaning improved efficiency, less maintenance and a safer working environment.

Low Gas Bottle Tray

The low, easy to access rear tray, allows the gas bottle to be rolled on and off with ease, eliminating the need for lifting.

Built-in Operator Safety

The power source features a built-in thermal protection device that will cut in if the machine is operated beyond its safe thermal operating zone.

Gas or Gasless

Suits gas shielded and gasless flux cored wires.

Spool Capacity

5kg & 15kg.

3 Year Gold Shield Warranty

Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance. For details, refer to the Weldmatic warranty statement.

Heavy Duty 4 Roll Drive System

Heavy Duty 4 Roll Drive System

Now with larger, stronger gears and ball bearings to further enhance the reliability and performance of Weldmatic machines.

Quick and Easy Gun Cable Connection

Quick and Easy Gun Cable Connection

All Weldmatic machines are supplied with an industrial quality gun and cable, complete with euro connector for easy fitting and removal.

Fan-On-Demand Cooling

Fan-On-Demand Cooling

By only operating when needed, the fan uses less power and generates less noise. The result is a reduction in dust build-up inside the machine, meaning less maintenance time and longer component life.

Easy Screw Spool Hub

Easy Screw Spool Hub

A new addition to the Weldmatic range is the easy screw spool hub, allowing for quick installation of 5 and 15kg spools.

Gas or Gasless

Gas or Gasless

Suited to both gas shielded solid wires and gasless (self-shielding) flux cored wires. Industrial front mount strength connectors make the switch between shielded and gasless wires quick and easy.

Superior Inductance Technology

Superior Inductance Technology

Weldmatic machines have been engineered to deliver smooth arc performance right across the welding range.

Low Gas Cylinder Tray

Low Gas Cylinder Tray

The low, easy to access rear tray, allows the gas bottle to be rolled on and off with ease, eliminating the need for lifting.

Heavy Duty Transformer

Heavy Duty Transformer

Engineered for reliability, the heavy duty transformer delivers a smooth, consistent weld performance.

Tool Tray

Tool Tray

Fold down tool tray provides storage for gun contact tips and nozzles.

Dual Front Handles

Dual Front Handles

Dual handles make it easy to move your Weldmatic around the workshop, plus provide handy storage for interconnecting work leads.

3 Year Gold Shield Warranty

3 Year Gold Shield Warranty

Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance.

Primary VoltageRated
Primary Current
Max.
Primary Current
Recommended
Generator kVA
Rated Output
@ 40C (10min)
Welding Current ChargeWire Size Range (mm)Product HeightShipping Weight
240 Vac -
50 Hz
25 Amps56 Amps13.5 kVA270 A, 27.5 V,
20% Duty Cycle
30 - 270 Amps0.6 - 1.2 solid
0.8 - 1.2 cored
760mm
810mm
(to top of handles)
127 kg
240 Vac -
50 Hz
15 Amps32 Amps8 kVA200 A, 24 V, 22%
Duty Cycle
Setting D-1 Max.
30 - 200 Amps0.6 - 1.2 solid
0.8 - 1.2 cored
15 Amp plug fitted for commissioning purposes only. 32 Amp plug to be installed by user to obtain full output.