- Structural Steel
- Process Piping
- Mining Maintenance
- Maintenance and Repair Rigs
- Heavy Construction
Detects if a remote control is plugged into the 14-pin receptacle and eliminates confusion of a remote/panel switch.
With zinc-rich primer protects sheet metal from rust and corrosion.
Allows the arc characteristics to be changed for specific applications in Stick, TIG, MIG and FCAW.
Lift-Arc TIG provides soft TIG arc starting without the use of high frequency, while Auto Crater and Auto Stop eliminates tungsten and workpiece contamination.
Prevents machine damage if the duty cycle is exceeded or airflow is blocked.
SunVision technology enables welding parameters to be viewed with greater clarity than analogue meters at virtually any angle. Meters can be seen clearly even in direct sunlight.
Quickly upload the latest software and download machine log files to retrieve in-depth information such
as diagnostics and machine statistics.
Prevents spills and makes servicing easy.
Beneficial when welding with stick and solid wires for easier fine tuning of tough-to-weld materials and out-of-position applications.
*Generator auxiliary power is 60Hz, and intended for operating equipment associated with welding, such as angle grinders, drills and floodlights. Some Australian 50Hz equipment incorporating induction motors, such as pumps, fans, air compressors, refrigeration or air-conditioners, may not operate correctly and could be damaged. Refer to appliance supplier or manufacturer to confirm suitability.
Reduces the open-circuit voltage to 30 volts when the welding power source is not in use. This feature is now built into the Big Blue 500X Pro for increased operator safety without compromising arc starts.
Welder/generator is warranted by Miller for 3 years, parts and labour. For details, refer to the Miller warranty statement. Engine is warranted separately by engine manufacturer.
Welding Mode | Amp/Volt Range | Rated Output | Generator Power Output Rated at 40° C | Dimensions (mm) | Weight* (Without Fuel) |
---|---|---|---|---|---|
CC/DC (Stick/TIG) | 20 – 500 A | 400 A at 36 VDC, 100% Duty Cycle 450 A at 33 VDC, 60% Duty Cycle 500 A at 30 VDC, 40% Duty Cycle | 415-380V 60Hz 3 Phase 21,000 watts peak, 15,000 watts continuous 240V 60Hz 1 Phase 4000 watts continuous | H: 1067 | Net: 694kg Shipping: 717kg *Additional 75kg when fuel tank is full. |
CV/DC (MIG/FCAW) | 14 - 50 V |
Engine Brand | HP | Type | Features | Engine Speeds | Capacities | Sound Levels at 7m | Automatic Engine Shutdown |
---|---|---|---|---|---|---|---|
Deutz D2011L03i | 32.0 | Three-cylinder, oil-cooled industrial diesel | EPA Tier 4i compliant, | Idle: 1350 RPM Weld: 1800 RPM | Fuel: 95 L Oil: 5.7 L Coolant: Integrated Oil | Idle: Weld (500 A Load): | Low Oil Pressure, High Coolant |