- Spec Sheets
- Dimension 812 Spec Sheet(261.79 KB)
- Ship Building
- Refineries & Foundries
- Railcar Manufacturing
- Pressure Tank & Vessel Fabrication
- Pipe Welding
- Maintenance & Repair
- Heavy Manufacturing
- Earth Moving Equipment
Provides versatility and outstanding arc performance in CV (MIG) and CC (Stick, TIG, CAC-A).
Enables operator to pre-set weld Voltage in the CV mode prior to welding.
Allows the operator to get in tight without sticking the electrode. An electrode compensation circuit ensures
consistent arc control performance regardless of the electrode size.
Easy to start difficult Stick electrodes such as E-6010 and E-7018.
Power source cooling system operates only when needed – reducing noise, energy use and the amount of contaminants pulled through the machine.
Ensures consistent weld performance by keeping output power constant even if primary input power varies by ±10%.
Provides quick, direct connection to Miller 14-pin wirefeeders and accessories.
Allows operator to change Voltage from feeder.
Provides additional protection from contaminants resulting in longer service life.
Prevents the wirefeeder power or other stray Voltages (less than 115 VAC) from harming the power source PC board.
For details, refer to the Miller warranty statement.
|Rated Output||Amp/Voltage Range||Amps Input at Rated Load Output, 50/60Hz||Dimensions (mm)||Weight|
|650 A at 44 VDC, 100% Duty Cycle||50 – 815 A in CC mode||73||50||34.8||H: 762 (including lift eye)|
(including strain relief)