- Rural Workshops
- Onsite Maintenance
- Light Fabrication
Single phase, multi-process inverter capable of handling MIG, Stick and Lift-TIG processes. With 200A of MIG, 170A of Stick and 200A of Lift-Arc capability, the Weldmatic 200i suits a wide range of applications - from fencing jobs to construction sites.
Built in VRD delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.
At only 13kg, the Weldmatic 200i is lightweight and portable, making it suitable for onsite maintenance.
Suits gas shielded and gasless flux cored wires. Suits 5kg spool.
Supplied with a tradesman quality gun and cable complete with euro connector for easy fitting and removal.
The control panel allows easy selection for gas and wire type, with infinitely variable Voltage and wire speed, indicated on the digital display. A suggested setting chart allows the Weldmatic 200i to be setup quickly and easily.
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance.
*Power source only.
Generators used to power this equipment must have a minimum capacity of 10kW continuous.
Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators. Therefore, WIA recommend that operation of equipment on the generator is confirmed before purchasing either welder or the generator.
|Primary Voltage||Rated Primary Current||Max. Primary Current||Recommended Generator kVa||Supply Plug||Rated Output @ 40C (10min)||Welding Current Range||Wire Size Range (mm)||Shipping Weight||Machine Weight|
|240 Vac - 50/60 Hz||14 Amps||36 Amps||10 kVA||15 Amps||200 Amps @ 24.5 Volts 15%|
77 Amps @ 17.9 Volts 100%
|30 - 200 Amps||0.6 - 0.9 solid|
0.8 - 1.2 cored