- Fencing Jobs
- Exhaust Repair
- Construction Sites
- Automotive Panel Repair
With 250A of MIG the Weldmatic 250i is capable of handling MIG, Stick and Lift-TIG processes, and is suitable for applications from fencing jobs, construction sites, automotive panel repair and exhaust repair.
Built in VRD delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.
At 25.5kg, the Weldmatic 250i is portable and comes supplied with 2 handles for easy two person lift, making it suitable for onsite maintenance.
Supplied with a tradesman quality gun and cable complete with euro connector for easy fitting and removal.
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.
Suits gas shielded and gasless flux cored wires.
Suits 5kg & 15kg spool.
The control panel allows easy selection for gas and wire type, with infinitely variable voltage and wire speed, indicated on the digital display.
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance. *Power source only.
Generators used to power this equipment must have a minimum capacity of 13kW continuous.
Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators. Therefore, WIA recommend that operation of equipment on the generator is confirmed before purchasing either welder or the generator.
|Primary Voltage||Rated Primary Current||Max. Primary Current||Recommended Generator kVa||Supply Plug||Rated Output @ 40C (10min)||Welding Current Range||Wire Size Range (mm)||Shipping Weight||Machine|
240 Vac - 50/60 Hz
250 Amps @ 26.5 Volts, 20% Duty Cycle
112 Amps @ 19.6 Volts, 100% Duty Cycle
30 - 250 Amps
0.6 - 0.9 solid