- Railroad Maintenance
- Pipe Welding
- Mining Maintenance
- Mechanical Contractors
- Maintenance and Repair Rigs
- Construction
Miller Heavy Industrial Range Brochure
700 Amps of weld power and 20,000 watts of peak generator power.
One dependable engine — two independent arcs with up to 400 Amps each. Or plug in an additional inverter for a true multi operator work platform!
Example: Two additional XMT multi-process machines equals 4 operators, up to 200 Amps each. Premium quality arcs allow operators to work independently with no arc interaction. Multi operator welding has never been easier or more versatile.
Standard 14-pin receptacle. For simple connection of remote controls and wire feeders.
With zinc-rich primer protects sheet metal from rust and corrosion.
More arcs and better fuel economy equal increased profits for your business. Estimated savings are 34 percent with a dual-operator unit versus two single operator units.
SunVision technology enables welding parameters to be viewed with greater clarity than analogue meters at virtually any angle. Meters can be seen clearly even in direct sunlight.
Quickly upload the latest software and download machine log files to retrieve in-depth information such as diagnostics and machine statistics.
*Generator auxiliary power is 60Hz, and intended for operating equipment associated with welding, such as angle grinders, drills and floodlights. Some Australian 50Hz equipment incorporating induction motors, such as pumps, fans, air compressors, refrigeration or air conditioners, may not operate correctly and could be damaged. Refer to appliance supplier or manufacturer to confirm suitability.
Beneficial when welding with stick and solid wires for easier fine tuning of tough-to-weld materials and out-of-position applications.
Makes switching from a single operator to dual operators a breeze. Weld up to 400 Amps per side when set up in dual-operator mode, or up to 700 Amps in single-operator mode.
Plug in an extra Miller inverter-based power source for a second welding arc.
| Welding Mode | Outout Mode | Weld Output Range | Weld Output Rated at 104° F (40° C) | Max Open Circuit Voltage | Generator Power Output Rated at 40° C*** | Dimensions (mm) | Weight* (Without Fuel) |
|---|---|---|---|---|---|---|---|
| CC/DC (Stick/TIG) | Separate (Dual Outputs) | 20 - 400 A | 300 A at 28 V, 100% Duty Cycle 400 A at 36 V, 40% Duty Cycle | 85 VDC 30 VDC** | 415-380V 60Hz 3 Phase: | H: 1092 H: 1283 (top of exhaust) W: 724 D: 1654 | Net: 784kg Ship: 799kg *Additional 75 kg when fuel tank is full |
| Paralleled (Combined) | 40 - 800 A | 500 A at 34 V, 100% Duty Cycle 700 A at 24 V, 60% Duty Cycle | |||||
| CV/DC (MIG/FCAW) | Separate (Dual Outputs) | 14 - 50 V | 300 A at 28 V, 100% Duty Cycle 400 A at 36 V, 40% Duty Cycle | ||||
| Paralleled (Combined) | 14 - 50 V | 500 A at 34 V, 100% Duty Cycle 700 A at 24 V, 60% Duty Cycle |
* Meets NEMA and IEC ratings. **VRD voltage for Stick & Sense voltage for Lift-Arc TIG. ***Will operate either 60Hz or 50/60Hz power tools, lights, etc.
| Engine Brand | HP | Type | Features | Engine Speeds | Capacities | Sound Levels at 7m | Automatic Engine Shutdown |
|---|---|---|---|---|---|---|---|
| Deutz D2011L04i | 48.6 | Four-cylinder, Industrial air/oil cooled diesel | EPA Tier 4i compliant, includes oil pan and intake manifold heater | Idle: 1350 RPM Weld: 1800 RPM | Fuel: 95 L Oil: 10.4 L Coolant: Integrated Oil | Idle: Weld (800 A Load): | Low Oil Pressure, High Coolant |