- Workshops
- Maintenance
- Light Industrial
- Body Shops
The Weldmatic 270 has the advantage when it comes to both power and performance. Pumping out a huge 270 Amps of genuine welding power, this machine outperforms the competition when it comes to welding performance.
This heavy weight MIG suits light to medium fabrication, rural maintenance and hire fleets.
Packed with all the features you’d expect in an industrial three phase MIG machine, the single phase Weldmatic 270 is for the serious welder who wants results.
Suits gas shielded and gasless flux cored wires.
5kg & 15kg.
Fillet weld up to 12mm of mild steel, stainless steel or aluminium.
The low, easy to access rear tray, allows the gas bottle to be rolled on and off with ease, eliminating the need for lifting.
The Fan-on-Demand™ cooling system uses less power and generates less noise by only operating when needed, meaning improved efficiency, less maintenance and a safer working environment.
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.
Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance. For details, refer to the Weldmatic warranty statement.
Now with larger, stronger gears and ball bearings to further enhance the reliability and performance of Weldmatic machines.
All Weldmatic machines are supplied with an industrial quality gun and cable, complete with euro connector for easy fitting and removal.
By only operating when needed, the fan uses less power and generates less noise. The result is a reduction in dust build-up inside the machine, meaning less maintenance time and longer component life.
W64 wirefeeder enables custom set-up to suit the job – including arc start, low wire speed, burnback, spot time, trigger latch, inch, purge, and pre and post gas.
A new addition to the Weldmatic range is the easy screw spool hub, allowing for quick installation of 5 and 15kg spools.
Suited to both gas shielded solid wires and gasless (self-shielding) flux cored wires. Industrial front mount strength connectors make the switch between shielded and gasless wires quick and easy.
Weldmatic machines have been engineered to deliver smooth arc performance right across the welding range.
The low, easy to access rear tray, allows the gas bottle to be rolled on and off with ease, eliminating the need for lifting.
Engineered for reliability, the heavy duty transformer delivers a smooth, consistent weld performance.
Fold down tool tray provides storage for gun contact tips and nozzles.
Dual handles make it easy to move your Weldmatic around the workshop, plus provide handy storage for interconnecting work leads.
Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance.
Primary Voltage | Rated Primary Current | Max. Primary Current | Recommended Generator kVA | Rated Output @ 40C (10 min) | Welding Current Range | Wire Size Range (mm) | Shipping Weight |
---|---|---|---|---|---|---|---|
240 Vac - 50 Hz | 25 Amps | 56 Amps | 13.5 kVA | 270 A, 27.5 V, 20% Duty Cycle | 30 - 270 Amps | 0.6 - 1.2 solid 0.8 - 1.2 cored | 142 kg |
240 Vac - 50 Hz | 15 Amps | 32 Amps | 8 kVA | 200 A, 24 V, 22% Duty Cycle Setting D-1 Max. | 30 - 200 Amps | 0.6 - 1.2 solid | 142 kg |
15 Amp plug fitted for commissioning purposes only. 32 Amp plug to be installed by user to obtain full output. |