- Medium to Heavy Fabrication
Packed with power, the Weldmatic 350 is robust and built to perform for professional fabrication applications. Capable of MIG, TIG and Stick welding, it offers optimal weld characteristics that provide high quality results.
Featuring Digital Volt and Amp meters, the 350 allows for easy and precise set up by retaining last weld information. Perfect for a workshop it comes packaged with a separate wire feeder for extra flexibility. Built for tough Australian conditions, and manufactured with 3 years warranty, the Weldmatic 350 offers reliability and performance that’s second to none.
Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.
32 Apm Plug
Voltage Reduction Device
Prevents the machine from operating beyond its safe thermal zone.
MIG, Stick, TIG weld and Arc Air Gouge with this all in one machine.
Takes 5kg and 15kg spools. Suits both gas shielded and gasless wires. A separate wire feeder provides extra maneuverability around the workshop for spaces that won't allow machines access. Perfect for welding at heights or small spaces.
With large and strong gears and ball bearings for extra reliability and performance.
Controls how far the wire burns back to the tip on completion of the welding operation.
|Primary Voltage||Rated Primary Current||Max. Primary Current||Recommended Generator KVA||Supply Plug||IP Rating||Weight||Standards Compliance|
|380/415 VAC – 50/60 Hz||19.4 Amps||25 Amps||25 kVA|
|AS60974.1 & AS1674.2 (VRD)|
|Output Range||Rated Output @ 40°C (10min)||Wire Size Range||Material Thickness Range|
|0.6/0.8/0.9/1.2mm||Welds up to 12mm+ steel plate, single pass|
|Current Range||Rated Output @ 40°C (10min)|