- Medium to Heavy Fabrication
The Weldmatic Fabricator is the most powerful WIA MIG welding machine for medium and heavy industrial fabrication applications. Packaged with a separate wire feeder it provides extra flexibility for a workshop set up and enables custom set up to suit the job including arc start, wire speed, burn back, spot time, creep mode, pre and post gas plus more!
Built with quality components for tough Australian conditions it comes with 3 years warranty, offering professional welders reliability and performance that’s second to none.
Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.
32 Amp Plug
Prevents the machine from operating beyond its safe thermal zone.
Reduces noise, energy use and contaminates.
Easy to read and easy to adjust parameters.
Takes 5kg and 15kg spools. Suits both gas shielded and gasless wires. A separate wire feeder provides extra maneuverability around the workshop for spaces that won't allow machines access. Perfect for welding at heights or small spaces.
With large and strong gears and ball bearings for extra reliability and performance.
Controls how far the wire burns back to the tip on completion of the welding operation.
|Primary Voltage||Rated Primary Current||Max. Primary Current||Recommended Generator KVA||Supply Plug||IP Rating||Weight||Standards Compliance|
|415 VAC – 50 Hz||18 Amps||27 Amps||20 kVA|
|AS60974.1 & AS1674.2 (VRD)|
|Current Range||Rated Output @ 40°C (10min)||Wire Size Range||Material Thickness Range|
|Welds up to 12mm+ steel plate, single pass|