- Repair and Maintenance
- Motor Sports Fabrication
- Aluminium Boat Fabrication
For intermediate to professional Stick/TIG welders looking for AC TIG capabilities for high precision aluminium welding. The Weldarc 200 AC/DC features an up-to-date and easy to use digital LCD interface for for quick setup through pre-set parameters and memory selection.
Built with HF Start and Pulse TIG functionality, the Weldarc 200 AC/DC also provides easy non-contact arc starting and allows greater heat control of the weld pool, increases weld penetration and speed, providing high quality weld results. Plus, it supports foot control adjustment for enhanced control capabilities.
Built with quality components and manufactured with 3 years warranty, the Weldarc 200 AC/DC is an easy choice for those looking for a well-priced, professional grade Stick/TIG welder that doesn’t compromise on results.
Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.
15 Amp Plug
Voltage Reduction Device
Smooths out the actual input current. Maximises efficiency when welding on long leads or from generators.
Weighing only 17kg, the Weldarc 200AC/DC can go where you go.
Reduces noise, energy use and contaminates.
For easy non-contact arc starting. Increases tungsten life. Reduces weld inclusions.
For greater heat control. Increases weld penetration, speed and quality.
Simple to navigate it offers quick and easy setup through pre-set parameters and memory selection.
For welding aluminium.
|Primary Voltage||Rated Primary Current||Max. Primary Current||Recommended Generator KVA||Supply Plug||IP Rating||Weight||Standards Compliance|
|240 VAC – 50/60 Hz||11 Amps||20 Amps||10 kVA|
|AS60974.1 & AS1674.2 (VRD)|
|Output Range||Rated Output @ 40°C (10min)|
|Output Range||Rated Output @ 40°C (10min)||Material Thickness Range|
|Welds up to 8mm steel or aluminium plate, single pass|