- Spec Sheets
- XMT 350 MPa Spec Sheet(307.71 KB)
- Truck and Trailer Manufacturing
- Ship Building
- Repair Shops
- Rental Fleets
- Power Generation Plants
Automatically compensates for various input Voltage. Suits jobsite and generator power. Keeps welding output constant even if input power varies by +/- 10%.
Provides high-quality weld cable connections.
The cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Allows TIG starting without the use of high-frequency. Starts the arc without contaminating the weld with tungsten.
Protects electrical components and PC boards from contamination.
Provides greater puddle control for superior 6010 Stick electrode performance, and outstanding MIG weld performance.
Increases the output Amperage at the start of a weld if necessary, eliminating electrode sticking.
Offers heavy-duty protection with the benefit of reduced weight.
Reduces the number of control setup combinations without reducing any features.
Easy to view and can be pre-set.
For details, refer to the Miller warranty statement.
|Input Power||Rated Output||Voltage Range - CV Mode||Amperage Range in CC Mode||Amps Input at Rated Load Output, 60Hz||Dimensions (mm)||Weight|
|3 Phase||350 A at 34 VDC,|
60% Duty Cycle
|10 – 38 V||15 - 425 A||N/A||20.6||14.2||13.6||H: 432|
|Single Phase||300 A at 32 VDC,|
60% Duty Cycle
|10 – 38 V||15 - 425 A||54.6||29.7||11.7||11.2|