- On-Site Maintenance
- General Fabrication
- Automotive Repair
From the workshop to on-site the Cutmatic 45 is highly portable and can go where you go. Capable of cutting mild steel, stainless steel and aluminium, its serious cutting capabilities can effortlessly clean cut up to 16mm and server cut up to 20mm.
With up-to-date date technology, the Cutmatic 45 offers more than its competition, including power factor correction for maximum efficiency. Built with quality components and manufactured to deliver, you’ll get more than you pay for with the Cutmatic 45.
Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators.
15 Amp Plug
Smooths out the actual input current. Maximises efficiency when welding on long leads or from generators.
Prevents the machine from operating beyond its safe thermal zone.
Designed for a safe and sound strike without high frequency.
Removes water in the air. Increases torch tip life.
Weighing only 11kg, the Cutmatic 45 can go where you go.
Primary Voltage | Rated Primary Current | Max. Primary Current | Recommended Generator KVA | Supply Plug | IP Rating | Weight | Standards Compliance |
---|---|---|---|---|---|---|---|
240 VAC – 50/60 Hz | 14.2 Amps | 22.5 Amps | 6 kVA (peak) | 15 Amp | IP21S | 11kg | AS60974.1 & AS1674.2 (VRD) |
Current Range | Rated Output @ 40°C (10min) | Cutting Tip Size | Mild Steel Cutting Range | Stainless Steel Cutting Range | Aluminium Cutting Range | Air Consumption | Air Pressure |
---|---|---|---|---|---|---|---|
15-45 Amps | 45A/98V @ 40% | 0.8-1.0mm | Clean cut 16mm | Clean cut 16mm | Clean cut 16mm | 1151/min | 90PSI/0.6MPA |