- 5 Outside Cover Lenses
- 2 Inside Cover Lenses
- Miller Helmet Bag
High-definition optics for precision arc recognition. Engineered to complement the colours emitted from the welding arc for enhanced clarity and natural colour — so that you can see more detail. Click here to find out more.
Sensors are normally triggered by the light when you strike an arc. In X-Mode, the sensors are triggered by the electromagnetic field that is created when you start a weld.
X-Mode overcomes instances where obstructions block a sensor when welding out-of-position. Even when there is an obstruction, the sensor will still trigger because of the electromagnetic field.
For outside work, X-Mode will stop the lens constantly lightening and darkening because of the light triggering the sensors. The sensors will only trigger the lens to darken when you start to weld.
Tested in Australia, the lens and helmet comply with Australian Standards AS/NZS 1338.1 (Auto-Darkening) and AS/NZS 1337.1 B (High Impact).
Digital controls with large displays allow the user to easily adjust modes, shade levels, delay and sensitivity.
The lightweight headgear has multiple settings to achieve the best fit and comfort.
At only 510g, the helmet can be worn for long periods, keeping operator fatigue to a minimum.
MIG, Stick, TIG, Flux Cored and Pulse.
Provide continuous arc sensing for the most demanding applications plus superior lens response.
Two replaceable lithium batteries, with solar assist, deliver up to 3000 hours of use.
Add a magnifying lens if required*. Magnifying lens not included.
Designed to withstand industrial environments, Miller helmets come with a 3 year warranty (auto-darkening lens only).
Designed by welders, for welders. Designed to complement the colours produced from the welding arc for improved clarity and natural colour - allowing you to see more detail.
Provides extensive adjustability settings and a pivoting top for better fit and comfort.
Product Specifications | |
---|---|
Viewing Area | 97 x 60 mm |
Operating Modes | 4 Modes: Weld, Cut, Grind, X-Mode |
Arc Sensors | 4 Independent Sensors Plus X-Mode |
Light State | Shade 3 (All Modes) |
Grind Mode | Shade 4 |
Cut Mode | Shade 5-9 |
X-Mode and Weld | Shade 8-13 |
TIG Rating | 5 Amps |
Switching Speeds (Light to Dark) | 1/25,000 Sec |
Delay Speeds (Dark to Light) | 0.10-1.0 Sec |
On/Off Control | Automatic |
Magnifying Lens Holder | Yes |
Weight | 510g |
Australian Standards | AS/NZS 1338.1 (Auto-Darkening) AS/NZS 1337.1B (High Impact) |
Warranty | 3 Years |
Digital Lens Technology | |
---|---|
Weld | Suits MIG, Stick, TIG, Flux Cored and Pulse welding processes. Shades 8-13. |
Cut | Suits Plasma, Laser, Gas welding and cutting applications. Shades 5-9. |
Grind | Suits weld preparation and clean-up. Fixed shade 4. |
X-Mode | Electromagnetic arc sensing technology eliminates sunlight interference, intermittent sensing (pipe), low amperage lens openings (TIG) & obstructed sensors. Shades 8-13. |
Parts and Accessories | Part Number |
---|---|
Front Lens Gasket | 216337 |
Front Lens Cover (5 Pk) | 216326P |
Filter Lens Gasket | 234758 |
Lens Assembly Auto-Darkening | 280056 |
Inside Lens Cover | 216327P |
Lens Holder | 234759 |
Battery Holder (Left & Right) | 216339 |
Replacement Lithium Battery (x2) | 217043 |
Ratchet Headgear | 256174 |
Comfort Cushion | 216336 |
Sweatband, Towelling (5 Pk) | 770299 |
Adjustment Angle/Stop Kit | 256178 |
Lens Holder (External) | 241978 |
Helmet Carry Bag with Miller Logo | 770250 |
Magnifying Lens | 212238P 212240P 212242P |