Digital Elite™ Helmet - Raptor

Print Page
New Product
View Image
Launch Gallery

Four Modes - Weld, Cut, Grind & X-Mode

ClearLight™ Lens Technology

High-definition optics for precision arc recognition. Engineered to complement the colours emitted from the welding arc for enhanced clarity and natural colour — so that you can see more detail. Click here to find out more.

What is X-Mode?

Sensors are normally triggered by the light when you strike an arc. In X-Mode, the sensors are triggered by the electromagnetic field that is created when you start a weld.

X-Mode overcomes instances where obstructions block a sensor when welding out-of-position. Even when there is an obstruction, the sensor will still trigger because of the electromagnetic field.

For outside work, X-Mode will stop the lens constantly lightening and darkening because of the light triggering the sensors. The sensors will only trigger the lens to darken when you start to weld.

Australian Standards

Tested in Australia, the lens and helmet comply with Australian Standards AS/NZS 1338.1 (Auto-Darkening) and AS/NZS 1337.1 B (High Impact).

Improved Digital Controls

Digital controls with large displays allow the user to easily adjust modes, shade levels, delay and sensitivity.

Lightweight Headgear

The lightweight headgear has multiple settings to achieve the best fit and comfort.


At only 510g, the helmet can be worn for long periods, keeping operator fatigue to a minimum.

Suits a Wide Range of Welding Processes

MIG, Stick, TIG, Flux Cored and Pulse.

Four Independent Arc Sensors

Provide continuous arc sensing for the most demanding applications plus superior lens response.

Battery Powered with Solar Assist

Two replaceable lithium batteries, with solar assist, deliver up to 3000 hours of use.

Magnifying Lens Compatible

Add a magnifying lens if required*. Magnifying lens not included.

Bonus Accessories

  • 5 outside cover lenses
  • 2 inside cover lenses
  • Helmet bag

3 Year Warranty

Designed to withstand industrial environments, Miller helmets come with a 3 year warranty (auto-darkening lens only).

ClearLight™ Lens Technology

ClearLight™ Lens Technology

Designed by welders, for welders. Designed to complement the colours produced from the welding arc for improved clarity and natural colour - allowing you to see more detail.

Digital Elite Helmet Headgear

Digital Elite Helmet Headgear

Provides extensive adjustability settings and a pivoting top for better fit and comfort.

Product Specifications
Viewing Area97 x 60 mm
Operating Modes4 Modes: Weld, Cut, Grind, X-Mode
Arc Sensors4 Independent Sensors Plus X-Mode
Light StateShade 3 (All Modes)
Grind ModeShade 4
Cut ModeShade 5-9
X-Mode and WeldShade 8-13
TIG Rating5 Amps
Switching Speeds (Light to Dark)1/25,000 Sec
Delay Speeds (Dark to Light)0.10-1.0 Sec
On/Off ControlAutomatic
Magnifying Lens HolderYes
Australian StandardsAS/NZS 1338.1 (Auto-Darkening)
AS/NZS 1337.1B (High Impact)
Warranty3 Years
Digital Lens Technology
WeldSuits MIG, Stick, TIG, Flux Cored and Pulse welding processes. Shades 8-13.
CutSuits Plasma, Laser, Gas welding and cutting applications. Shades 5-9.
GrindSuits weld preparation and clean-up. Fixed shade 4.
X-ModeElectromagnetic arc sensing technology eliminates sunlight interference, intermittent sensing (pipe), low amperage lens openings (TIG) & obstructed sensors. Shades 8-13. 
Parts and AccessoriesPart Number
Front Lens Gasket216337
Front Lens Cover (5 Pk)216326P
Filter Lens Gasket234758
Lens Assembly Auto-Darkening280056
Inside Lens Cover216327P
Lens Holder234759
Battery Holder (Left & Right)216339
Replacement Lithium Battery (x2)217043
Ratchet Headgear256174
Comfort Cushion216336
Sweatband, Towelling (5 Pk)770299
Adjustment Angle/Stop Kit256178
Lens Holder (External)241978
Helmet Carry Bag with Miller Logo770250
Magnifying Lens212238P